Breg Polar Care Cube Cleaning Instructions
Cleaning Instructions for the Breg Polar Care Cube
The Breg Polar Care Cube is a highly effective cold therapy device designed to help manage pain and reduce swelling after surgery or injury. To ensure it functions optimally and remains safe to use, regular cleaning and maintenance are essential. Without proper care, bacteria, mold, and mineral deposits can accumulate inside the device, potentially compromising its performance and safety. This guide provides clear, step-by-step instructions for keeping your Breg Polar Care Cube clean and in excellent working condition.
Why Cleaning Matters
Maintaining cleanliness in medical devices like the Breg Polar Care Cube is not just about keeping it looking good—it’s about safety and efficiency.
- Hygiene: Stagnant water inside the device can harbor bacteria, mold, and other pathogens. These contaminants can create unpleasant odors and pose a health risk.
- Performance: A clean unit ensures consistent and effective cold therapy. Blockages from sediment or biofilm buildup can reduce water flow and cooling efficiency.
- Durability: Regular maintenance extends the life of the device by preventing damage to critical components like the pump and tubing.
What You’ll Need
Before starting, gather these supplies to make the cleaning process easier:
- Mild dish soap or antibacterial soap
- White vinegar
- Clean, soft cloths or towels
- Distilled water (to prevent mineral build-up)
- A small brush for scrubbing hard-to-reach areas (optional)
How To Clean Breg Polar Care Cube
1. Power Down and Drain
Always start by turning off and unplugging the device. Disconnect the therapy pad from the cold therapy unit and carefully pour out any remaining water from the reservoir. This prevents stagnant water from causing contamination.
2. Wipe the Exterior
Using a damp cloth with a small amount of mild soap, clean the exterior surface of the Cube. Be sure to remove any dust or debris, but avoid using excessive water that could seep into the electrical components.
3. Clean the Reservoir
Prepare a cleaning solution using warm water and a few drops of mild soap. Pour this solution into the reservoir, then use a brush or sponge to scrub away any residue or build-up inside. Once clean, thoroughly rinse the reservoir with fresh water to remove all soap.
4. Sanitize the Tubing
The tubing is a critical component that circulates water throughout the system. To clean it:
- Mix one part white vinegar with three parts water.
- Fill the reservoir with this mixture and reconnect the tubing.
- Turn on the unit and let it run for 10–15 minutes, allowing the solution to circulate through the tubing and therapy pad.
- Afterward, disconnect the tubing, empty the reservoir, and rinse the system with clean water to remove any lingering vinegar.
- This step ensures the inside of the tubing is free of bacteria, mold, and mineral deposits.
5. Clean the Therapy Pad
The therapy pad can also harbor bacteria if not maintained properly. Wipe it down using a cloth dampened with soapy water. Pay attention to any areas where residue may have accumulated. Do not immerse the pad in water, as this could damage it. After cleaning, dry the pad thoroughly before storing or using it.
6. Allow Everything to Dry
After cleaning, let the Cube, tubing, and therapy pad air dry completely. Moisture left in the system can lead to mold growth or odors. Use a towel to speed up the drying process, if necessary.
Monthly Deep Cleaning
For devices used frequently, it’s a good idea to perform a more thorough cleaning once a month. This involves using a stronger cleaning solution made from equal parts vinegar and water. Follow the same process as above, but let the solution circulate for 15–20 minutes. Afterward, rinse the system thoroughly to ensure no vinegar remains.
Storage Tips
Once the Cube is clean and dry, store it in a cool, dry place. Avoid leaving water in the reservoir between uses, as stagnant water can lead to bacterial growth. Always empty and dry the device after each use.
Signs Your Cube Needs Cleaning
To keep the Cube in top condition, pay attention to these warning signs:
- Unpleasant Odors: A musty or sour smell often indicates bacterial or mold growth.
- Reduced Cooling Efficiency: If the device isn’t performing as well as usual, it may be due to blockages or residue in the tubing or reservoir.
- Discolored Water: Cloudy or discolored water is a sign of contamination and requires immediate cleaning.
Conclusion
Regular cleaning is essential for maintaining the safety and effectiveness of your Breg Polar Care Cube. By following the steps outlined above, you can ensure your device provides reliable cold therapy and lasts for years to come. A little effort goes a long way in keeping your equipment clean, efficient, and safe to use.
Need help with using your Breg Cube? Our guide here will help you learn how to use the Breg Polar Care Cube for your knee.
At DME-Direct we carry a full selection of Breg cold therapy machines, and replacement parts including:
Breg Polar Care Wave Cold Therapy System
Breg Polar Care Wave Knee Cold Therapy System