|
Model: Ultralign+
- DeRoyal UltraLign features panels in the front and back for greater stiffness.
- Restricts movement to allow proper healing.
- DeRoyal Ultralign has an Orthowick liner for better breathability.
- Comfortable yet very supportive.
DeRoyal UltraLign
The DeRoyal Ultralign+ LSO is a superior off-the-shelf lumbar sacral orthosis preferred by many top orthopedic surgeons. This product has a patented closure system for quick and easy fitting, and employs soft, breathable fabrics to help prevent skin irritation. The DeRoyal Ultralign+ comes in a large variety of sizes and offers a choice of tapered or non-tapered styles, and is available with a short low-profile or a regular standard height anterior panel, thus allowing it to fit 80% of all spine patients comfortably and effectively. The DeRoyal Ultralign+ design meets most requirements for a lumbosacral spinal orthosis from L1 to L5 level pathologies. This model features removable Kydex plastic inserts in the front and back that are heat moldable and provide the greatest degree of protection and control over movement of the lumbar spine.
DeRoyal Ultralign+ LSO Benefits:
- FREE GROUND SHIPPING in the continental US on all orders over $100.
-
Ultralign+ patented dynamic closure provides for easy application and a snug, rigid fit. The DeRoyal Ultralign+ has side panels that can be adjusted/tapered to provide a more custom fit than other off-the-shelf LSOs.
-
Dynamic Straps offer superior compression to off-load the spine
-
For shorter patients, the Low Profile Tapered model features an anterior panel that is 6 1/2" tall (versus the standard 9 1/2" panel on the regular versions of this brace.)
-
Soft breathable fabrics are used for a lighter, cooler, more comfortable fit.
-
For those with sensitive skin, the Inner-liner is comprised of non-allergenic foams (called Orthowick) which wick moisture away from the body, protecting the skin against breakdown.
-
Instant Full-range adjustment.
-
The neutral anterior Kydex plastic insert is combined with a rigid posterior Kydex insert that is heat moldable to help keep the patient in the desired alignment. (Choose from 0, 15 or 25 degrees - most commonly ordered is the 15 degree which accommodates a typical patient with a normal lordotic curvature in the low back).
-
For Bariatric patients, the size XXL can be expanded by adding extension panels. These panels come in pairs and in two widths: 3 1/2" width and 5 1/2" width. Choose a set of 3 1/2" panels to gain up to 7" more circumferential waist measurement; Choose a set of 5 1/2" panels to accommodate up to 11" more room in the waist/hip area.
Indications:
-
Post-operative lumbar fusion
-
Laminectomy or Discectomy
-
Compression Fractures in the lumbar region
-
Osteoporosis
-
Degenerative Disc Disease
Available Sizes: Take three circumferential measurements as described below. You must fit within the three size ranges (Xyphoid, Navel, Trochanter) to achieve a proper fit for the brace size chosen:
Step 1: Measure 1" below bottom of breast bone or xyphoid process (chest).
Step 2: Measure around your navel (waist).
Step 3: Measure around the fullest area of the trochanter (hips).
NON-TAPERED SIZING:
Small (UPL1330-*) = Chest 31"-35", Waist 31"-35", Hip 31"-35"
Medium (UPL1430-*) = Chest 34"-38", Waist 32"-38", Hip 34"-39"
Large (UPL1530-*) = Chest 37"-41", Waist 35"-41", Hip 38"-42"
XLarge (UPL1630-*) = Chest 38"-45", Waist 38"-45", Hip 38"-45"
XXLarge (UPL1730-*) = Chest 45"-53", Waist 45"-53", Hip 45"-53"
TAPERED SIZING:
Small (UPL2330-*) = Chest 25"-31", Waist 25"-31", Hip 27"-33"
Medium (UPL2430-*) = Chest 28"-35", Waist 29"-36", Hip 32"-38"
Large (UPL2530-*) = Chest 32"-38", Waist 32"-38", Hip 35"-41"
XLarge (UPL2630-*) = Chest 35"-42", Waist 36"-42", Hip 38"-46"
XXLarge (UPL2730-*) = Chest 40"-46", Waist 39"-47", Hip 43"-49"
LOW PROFILE TAPERED SIZING:
Small (UPLP2330-*) = Chest 25"-31", Waist 25"-31", Hip 27"-33"
Medium (UPLP2430-*) = Chest 28"-35", Waist 29"-36", Hip 32"-38"
Large (UPLP2530-*) = Chest 32"-38", Waist 32"-38", Hip 35"-41"
XLarge (UPLP2630-*) = Chest 35"-42", Waist 36"-42", Hip 38"-46"
XXLarge (UPLP2730-*) = Chest 40"-46", Waist 39"-47", Hip 43"-49"
Available Color: Black.
Versions:
Non-Tapered: Ideal for Men (or Women without a large difference between their chest and waist measurements).
Tapered: Tapered design provides a more comfortable fit for certain body types (Women or for Men that are more "pear shaped").
Low-Profile Tapered: Ideal for short-waisted patients. The Low Profile version has an anterior panel that is 6 1/2" tall.
Alignment: Consult with a medical professional for proper alignment. Choose from below:
0 degrees (NOTE: Not available in Low Profile)
15 degrees
25 degrees
Recommended Manufacturer HCPC: L0637
|
